Calculators / Calculator

Invoice factoring calculator: what the fee costs as an APR

A factoring fee is charged on the whole invoice, a few weeks at a time. You get only part of the invoice, and only until your customer pays. This turns the fee into a yearly rate you can compare.

The invoice

What the factor pays when you sell the invoice. The rest is held back until your customer pays.

Application, due diligence, wire or per-invoice charges, in dollars, for this invoice.

The factoring fee

A part of a period counts as a whole one. For a single flat fee, put 0 in "Then".

The fee is a percentage of
When your customer pays

Count from the day you sell the invoice. If your customer usually pays late, put the days it usually takes.

APR on this invoice

–

Cash when you sell the invoice
–
Factoring fee
–
Other fees
–
Total cost
–
Cost as a share of the invoice
–
Paid to you when your customer pays
–
First fee, scaled to a year
–
Effective annual rate, compounded
–
If your customer pays in
DaysTotal costAPR

The APR treats the cash you receive as a single advance repaid by a single payment on the day your customer pays: the cost divided by the cash, times 365 divided by the days. That is the method California and New York require of factors in their disclosures, which assume the invoice is paid on its due date. The calculator assumes the fee comes out of the held-back part of the invoice when your customer pays. If your factor takes it out of the advance instead, enter it as an other fee and put 0 in the fee boxes. Nothing you type leaves your browser.

How factoring is priced

When you factor an invoice, you sell it. The factor pays you part of the invoice straight away, the advance, and holds back the rest, often called the reserve. When your customer pays the factor, it keeps its fee and sends you what is left of the reserve.

The fee is a percentage, and the contract says how it grows with time. Some contracts charge one percentage however long the invoice takes. Some charge for a first period and add a smaller percentage for each period after it. Some charge the same percentage again for every 30 days or part of them. The calculator takes all three: a fee for a first period, a fee for each period after it, and any part of a period charged as a whole one.

Take the calculator's example. A $50,000 invoice is sold with 85% advanced, for a fee of 3% for the first 30 days and 1% for each further 10. You receive $42,500. If your customer pays in 45 days, the fee is $2,500 and $5,000 comes back to you. These numbers are an illustration, not a survey of what factors charge.

Why the fee is bigger than it looks

Scaled to a year, 3% for 30 days is 36.5%. The real rate is higher, for two reasons.

The fee is charged on the whole invoice, but you only get the advance. $1,500 is 3% of $50,000, but it pays for the use of $42,500. Paid on its due date, day 30, the example invoice has an APR of 42.9%.

Time is charged in whole periods. Paid in 45 days, the same invoice costs 47.7% a year: the 45 days run past the first 30 into a second 10-day period, and both further periods are charged in full.

The day your customer pays sets the price

Two fee schedules on a $50,000 invoice, 85% advanced. A part of a period is charged as a whole one
Customer pays in3%, then 1% a 10 days: feeAPR3% a 30 days: feeAPR
10 days$1,500129%$1,500129%
20 days$1,50064%$1,50064%
30 days$1,50043%$1,50043%
31 days$2,00055%$3,00083%
40 days$2,00043%$3,00064%
45 days$2,50048%$3,00057%
60 days$3,00043%$3,00043%
61 days$3,50049%$4,50063%
90 days$4,50043%$4,50043%

Read down either fee column and the fee only grows. Read down the APR columns and the rate moves both ways. A customer who pays early is the dearest, because the first period is charged in full: an invoice paid in 10 days carries three times the APR of one paid in 30, 129% against 43%. Under a schedule that charges again for every 30 days or part of them, paying on day 31 instead of day 30 doubles the fee, from $1,500 to $3,000.

So put in the days your customer really takes, not the payment terms on the invoice.

What the advance does

The same fee, $2,500, on a $50,000 invoice paid in 45 days
AdvanceCash when you sell the invoiceAPR
70%$35,00058%
75%$37,50054%
80%$40,00051%
85%$42,50048%
90%$45,00045%
95%$47,50043%

When the fee is a percentage of the invoice, a smaller advance means the same fee for less money. At 70% advanced, the example's APR is 58%. At 95%, it is 43%. Some factors charge the fee on the advance instead, and the calculator has a switch for that.

Fees taken out of the advance

The example invoice, paid in 45 days
Other fees out of the advanceCash receivedTotal costAPR
None$42,500$2,50047.7%
$100$42,400$2,60049.7%
$250$42,250$2,75052.8%
$500$42,000$3,00057.9%
$1,000$41,500$3,50068.4%

Application, due diligence, wire and per-invoice charges come out of the cash you receive, and every dollar of them counts in the cost. Ask for each one in dollars before you compare offers.

What California and New York make factors disclose

Federal truth-in-lending rules are written for consumer credit, not for a business that sells its invoices. California and New York require factors to show an estimated annual percentage rate in a standard table before you sign. California also requires your signature on the disclosure before the deal is made.

What a factor must disclose: California Financial Code 22800-22802 and 10 CCR 912-943; New York Financial Services Law 802 and 806 and 23 NYCRR 600
CaliforniaNew York
Offers covered$500,000 or less$2.5 million or less
Who is exemptDepository institutions, Farm Credit lenders, financing secured by real estate, some vehicle dealers, and a provider that makes no more than one such deal in the state in a year, or five that are incidental to its businessFinancial institutions, Farm Credit lenders, financing secured by real estate, leases, some vehicle dealers and rental companies, and a provider that makes no more than five such deals in the state in a year, among others
When the invoice is assumed to be paidOn its due dateOn its due date, or after your customer's average payment period over up to the past twelve months
What counts as the finance chargeThe invoice minus what you are paid when you sell it, not counting a reserve the factor expects to return, plus other charges of the kind Regulation Z countsThe same, and avoidable fees that are not imposed as part of the financing are left out
Rows in the disclosureFunding provided, estimated APR, finance charge, payment, estimated term, repurchase costsThe same six, plus collateral requirements and avoidable fees and charges

Both states use the method this calculator uses: the cash you receive is a single advance, repaid by a single payment when your customer pays. And both assume, unless a New York factor uses your customer's payment history instead, that the invoice is paid on its due date. That is why the calculator shows the due-date APR next to the one for the days you expect. If your customers pay late, the disclosed rate describes a different invoice from yours.

Outside those two states, nothing makes a factor give you this number. The calculator does.

For scale

SBA 7(a) lines of credit approved in the year to September 30, 2026 carried a median rate of 9.75%: 12,321 of them. At that rate, the example's $42,500 for 45 days would cost about $511 in interest. The factoring fee is $2,500, almost five times as much.

SBA also guarantees a line made for lending against receivables and inventory, the Working Capital CAPLine. It is rare: 60 were approved in the same twelve months, at a median rate of 8.38% and a median size of $750,000. The lender usually sets how much you can draw from a borrowing base, a percentage of your eligible invoices and inventory, and has to leave out any invoice more than 90 days past due unless SBA agrees in writing.

That is not a fair comparison, and you should know why. An SBA line needs full underwriting and a personal guaranty from every owner of 20% or more, and a business that factors may not qualify. A factor sells speed and a yes. The comparison shows their price.

An SBA loan is also no way out of factoring. SBA's lending manual says it in one line: "Factoring agreements are not eligible for refinancing."

Before you sign

  1. Get the fee schedule in writing. The percentage for the first period, the length and price of each later period, and whether the fee is a percentage of the invoice or of the advance.
  2. Ask for every other fee in dollars, and whether any are charged each month whether or not you sell an invoice.
  3. Ask when the rest of the invoice comes back once your customer has paid.
  4. Ask what happens if your customer pays late or never. Whether you must buy the invoice back, by when, and at what cost.
  5. Ask whether you must sell all your invoices, for how long the contract runs, and what it costs to leave early.
  6. Ask what else the factor takes as security. New York's disclosure has a row for it.
  7. In California or New York, ask for the disclosure, and compare its APR with this calculator set to pay on the due date.

How the APR is calculated

Selling an invoice works like a single advance repaid by a single payment. The advance is the cash you receive, after any fees taken out of it. The payment happens, in effect, when your customer pays: the factor keeps back what it advanced, plus its fee. Appendix J of Regulation Z, which both states' rules point to, treats the whole term of such a transaction as one period. The rate for the term is the cost divided by the cash, and the APR is that rate times the number of such terms in a year, 365 divided by the days.

For the example paid in 45 days: $2,500 divided by $42,500 is 5.88% for the term, times 8.11 terms a year, which gives 47.7%. The effective annual rate compounds the rate for the term instead, as if you sold an invoice like this again and again for a year, and it is always higher.

A factor's disclosed APR can differ from ours. The state rules count as cost any part of the reserve the factor does not expect to return, they count other charges only if Regulation Z would, and New York lets a factor use your customer's average payment time instead of the due date.

This page is general information. It is not legal advice, and it cannot tell you whether a particular contract is fair or enforceable.

Sources

  1. California Financial Code, Division 9.5, Commercial Financing Disclosures, sections 22800 to 22802, California Legislative Information. Definition of factoring, the $500,000 limit (through the definition of a recipient), the exemptions, and the disclosures a provider must give and have signed before the deal is made. Checked November 4, 2026.
  2. California Code of Regulations, title 10, sections 912, 940, 941 and 943, Legal Information Institute, Cornell Law School. Operative December 9, 2022. The factoring disclosure table, the APR method (Regulation Z, Appendix J), the assumption that the invoice is paid on its due date, and the finance charge of a factoring transaction. Checked November 4, 2026.
  3. New York Financial Services Law, sections 802 and 806, New York State Senate. Exemptions, including the $2.5 million limit, and the factoring disclosure: an estimated APR calculated as a single advance and a single payment, with the term set by the due date or by the customer's average payment period. Checked November 4, 2026.
  4. 23 NYCRR 600.2, 600.3, 600.12 and 600.13, Legal Information Institute, Cornell Law School. New York's definition of the finance charge, the APR method, the eight-row factoring disclosure and the due-date assumption. Checked November 4, 2026.
  5. Appendix J to Part 1026, Annual Percentage Rate Computations for Closed-End Credit Transactions, Consumer Financial Protection Bureau. In a single advance, single payment transaction, the unit-period is the term, up to a year, and a term of less than a year counts 365 divided by its days as the number of unit-periods in a year. Checked November 4, 2026.
  6. SOP 50 10 8.1, Lender and Development Company Loan Programs, U.S. Small Business Administration. Effective October 1, 2026. Section B, Chapter 4: Working Capital CAPLines and the borrowing base. Appendix 14: factoring agreements are not eligible for refinancing with a 7(a) loan. Checked November 4, 2026.
  7. 7(a) & 504 FOIA dataset, U.S. Small Business Administration. Records as of September 30, 2026. Rates on 7(a) lines of credit and on Working Capital CAPLines approved from October 2025 to September 2026. Checked November 4, 2026.

Corrections and updates

  • First published.

This article is general information, not advice for your particular situation. Loan terms depend on your lender and your business. How we work · Report an error